Cherished Moments » Inkless Wipes
Inkless Wipes Instruction
Each kit contains enough material to make 4 full prints.
Child under 6 months we recommended to have foot print instead of hand print.
Step 1: Ensure that the hands/feet being printed are clean and dry.
Step 2: If you are using the towelette wipe on a small child it is best to do it when they are in a clam mood or sleep.
Step 3: It is also best if the paper is placed on a hard surface i.e. on the floor (for feet), the table, a thick pad,hard backed book etc.
Step 4: Please make sure the slightly glossy surface of the paper is facing upwards as this is the side with the special coating. Nothing will happen if the paper is up the wrong way.
Step 5: It is normal for the wipe to feel almost dry and very slightly greasy.
Step 6: Rub the wipe over the area to be printed (not too much) just enough to make sure all the part being printed is covered.
Step 7: Take care not to touch the paper if you have handled the wipe as your print will also appear.
Step 8: As with all prints, the ink will smudge if the paper or body part moves whilst the print is being taken.
Step 9: Hold body part on paper for approx...2-4 seconds.
Step 10: The print will appear as if by magic! –If you don’t see anything straight away you are using the wrong side of the paper.
Step 11: The printing process can be repeated as many times as the wipe allows.
Step 12: Wash hand or feet to remove any wipe residue after printing has been completed.